Skip to content
Symetrix logo

Authorized Symetrix dealer

Symetrix audio processing and room control.

A hand touching a Symetrix touchscreen on a courtroom bench, with the public gallery blurred behind

Processors for meeting rooms, event spaces and larger sites, Dante I/O that puts inputs where they are needed, and the wall panels and touchscreens the people in the room use. Varto helps select Symetrix equipment and plans it into the wider room system.

Prefer to talk? (888) 656-6233

processors

Pick the processor by I/O and echo cancellation.

Prism, Radius NX and Edge are open-architecture processors configured in Composer, each with optional 64 x 64 Dante. Only Radius NX and Edge offer echo cancellation, which matters in a conferencing room.

The four Symetrix Prism processors stacked, from the 16x16 to the half-width 4x4

fixed I/O · 4×4 to 16×16

Prism

Four sizes for rooms whose inputs and outputs are known up front, extendable with xIO expanders. The 4×4 is half-rack and runs on PoE+.

A Symetrix Radius NX 12x8 processor, three-quarter view

conferencing

Radius NX

4×4 or 12×8, with a USB port for a soft codec or multitrack recording, an optional echo cancellation coprocessor and one card slot.

The four card slots, A to D, on the rear of a Symetrix Edge processor, each fitted with a card

four card slots

Edge

A frame for an unusual mix of analog, echo cancellation, USB, VoIP and telephone cards, for projects the fixed sizes do not fit.

For analog rooms that need no programming, Jupiter runs one of 85 ready-made apps for mixing, paging or background music. Symetrix also makes Cognio, a separate platform set up in DesignOps; some of its features are still arriving in software updates, so we confirm what ships today.

Dante I/O

Put inputs and outputs where they are needed.

Symetrix xIO expanders are Dante endpoints configured from Composer, so a microphone input can sit at the lectern and an output at the far wall.

Symetrix xIO Dante expanders, half-rack and 1U, front and rear

half-rack or 1U

xIn, xOut and xIO

Four-channel half-rack boxes powered over PoE, or 12-channel 1U units with a built-in switch and a redundant Dante port.

A Symetrix xIO Stage 4x4 plate with four XLR inputs and four XLR outputs

wall or floor plate

xIO Stage 4×4

Four XLR inputs and four XLR outputs on a wall or floor plate, for a stage edge or a lectern position.

room controls

Controls sized to the person using the room.

A knob for volume, a panel with source buttons, or a touchscreen with the room’s own layout. Composer configures all of them and builds the touchscreen layouts, with no extra licensing.

Four black Symetrix ARC wall panels with knobs, buttons and displays

single-gang

ARC wall remotes

Knobs, buttons, displays and touch in Decora plates, wired over CAT5 or CAT6 up to 4,000 feet in total, for volume, source, mute and presets.

A white Symetrix two-gang wall controller with a knob, eight buttons and two displays beside a boardroom door

network wall controllers

W-Series

OLED-labeled knobs and buttons on PoE, from a single encoder to a two-gang panel with eight buttons.

Two Symetrix touchscreens showing custom control screens, one on a tabletop stand

5, 7 or 10 inch

T-Series touchscreens

PoE touchscreens running custom control screens designed in Composer, on the wall or on a tabletop stand.

Composer also carries control modules for specific Shure and Sennheiser wireless models, so the room’s processor can watch the microphones. We confirm the module for your exact models.

next step

Tell us the room, the sources and who will run it.

Or send the model numbers. Either one gets a quotation.